Shopping Cart

Enquiry form

Fill out the enquiry form below and a Nero team member will be in touch with you as soon as possible.


Enquiry form

Fill out the enquiry form below and a Nero team member will be in touch with you as soon as possible.


Enquiry form

Fill out the enquiry form below and a Nero team member will be in touch with you as soon as possible.


Enquiry form

Fill out the enquiry form below and a Nero team member will be in touch with you as soon as possible.


Enquiry form

Fill out the enquiry form below and a Nero team member will be in touch with you as soon as possible.


Secure up to 4 samples with single payload

Built-in thermometer allows live temperature sensing

Up to 3-metre sample depth

~1L/min sampling speed

Drone agnostic with simple modification

Designed and assembled in Australia

4 bottles, 1 payload

Secure up to 4 separate samples with Nero Poli's multi-bottle payload. The payload uses a GL-45 thread, capable of accommodating a range of industry-standard sampling bottle sizes and materials*.

*May affect flight time and aircraft compatibility

Sample with confidence

A 3-metre long hose allows your Nero water sampler and drone to secure samples while maintaining a safe distance above the water's surface.

Live temperature sensing

A thermometer is built into the end of Nero Poli's sampling hose, allowing you to receive live temperature readings of sampling locations, viewable via Nero Poli's remote control.

Detach hose remotely

The sampling hose can be detached remotely using Nero Poli's standalone remote control so you can keep your water sampler and drone safe in case of emergency.

Technical specifications

Nero Poli water sampler

Dry weight

1.7kg

Dimensions

Payload without bottles:
220 H x 175 W x 210 D mm

With 4 x 250mL bottles attached:
220 H x 190 W x 210 D mm

Operating temperature

0 - 50 degrees Celcius

Sampling speed

~1L per minute

Ambient humidity range

20% to 80% RH (relative humidity)

Liquid temperature range

5 to 50 degrees Celcius

Maximum operational height from water level

3 metres

Number of samples

Four

Tank capacity

100mL to 4,000mL

Power requirements

Voltage: 12V
Amperage: 1A

Contact materials

  • Formlabs Tough 2000 Resin
  • Silicone
  • Polypropylene
  • Anodised aluminium

DJI Matrice 300

Dimensions

Unfolded, propellers excluded:
810×670×430 mm (L×W×H)

Folded, propellers included:
430×420×430 mm (L×W×H)

Diagonal wheelbase

895mm

Weight (with single downward gimbal)

Approx 3.6kg (without batteries)
Approx 6.3kg (with two TB60 batteries)

Single gimbal damper's max payload

930g

Max takeoff weight

9kg

Operating frequency

2.4000 - 2.4835 GHz
5.725 - 5.850 GHz

EIRP

2.4000 - 2.4835 GHz
29.5dBm (FCC); 18.5dBm (CE)
18.5dBm (SRRC); 18.5dBm (MIC)

5.725 - 5.850 GHz
28.5dBm (FCC); 12.5dBm (CE)
28.5dBm (SRRC)

Hovering accuracy (P-mode with GPS)

Vertical:
±0.1m (Vision System enabled)
±0.5m (GPS enabled)
±0.1m (RTK enabled)

Horizontal:
±0.3m (Vision System enabled)
±1.5m (GPS enabled)
±0.1m (RTK enabled)

RTK positioning accuracy

When RTK enabled and fixed:
1cm + 1ppm (horizontal)
1.5cm + 1ppm (vertical)

Max angular velocity

Pitch: 300°/s, Yaw: 100°/s

Max pitch angle

30° (P-mode, Forward Vision System enabled: 25°)

Max ascent speed

S mode: 6m/s
P mode: 5m/s

Max descent speed (vertical)

S mode: 5 m/s
P mode: 4m/s

Max descent speed (tilt)

S mode: 7m/s

Max speed

S mode: 23 m/s
P mode: 17 m/s

Service ceiling above sea level

5,000m (with 2110 propellers, takeover weight ≤ 7kg);
7,000m (with 2195 propellers, takeover weight ≤ 7kg)

Max wind resistance

15 m/s (12 m/s when taking off or landing)

Max flight time

55 min

Supported DJI gimbals

Zenmuse XT2 / XT S / Z30 / H20 / H20T / DJI P1 / DJI L1

Supported gimbal configurations

  • Single Downward Gimbal,
  • Dual Downward Gimbals
  • Single Upward Gimbal
  • Upward and Downward Gimbals
  • Triple Gimbals

Ingress Protection Rating

IP45

GNSS

GPS + GLONASS + BeiDou + Galileo

Operating temperature

-20°C to 50°C (-4°F to 122°F)

Get in touch with a Nero team member today.

Contact us now to find out more about our water samplers or if you have any other enquiries.

Get in touch with a Nero team member today.

Contact us now to find out more about our water samplers or if you have any other enquiries.

Simple and speedy sampling.

Our Nero Mia water sampler keeps water sampling simple. Secure a single 2 litre sample in as little as a minute.